Related Certification(s):
Fortinet Certified Professional, Fortinet FCP Fortinet Certified Professional Secure Networking Certifications
Fortinet NSE5_FSW_AD-7.6 Exam Topics - You’ll Be Tested in Actual Exam
For the Fortinet NSE 5 FortiSwitch 7.6 Administrator exam, you should understand core FortiSwitch concepts such as how FortiSwitch operates as a managed switch and how it integrates with FortiGate through FortiLink for centralized control, consistent policy, and simplified operations. Deployment and management covers choosing the right topology and mode, planning switch discovery and authorization, configuring VLANs and trunks, assigning ports to roles, and managing configuration changes, firmware, and templates so multiple switches can be operated efficiently and safely. Layer 2 control and security focuses on the protocols and features that keep switching stable and secure, including STP and RSTP behavior to prevent loops, link aggregation for redundancy and bandwidth, and protections like port security, DHCP snooping, dynamic ARP inspection, storm control, and 802.1X to reduce spoofing and unauthorized access. Monitoring and troubleshooting requires knowing where to check status and logs, how to validate FortiLink health, VLAN tagging, and port negotiation, and how to interpret alerts, MAC address tables, LLDP output, and spanning tree state to isolate issues. You should also be comfortable with practical verification steps, such as checking interface counters, PoE status, and connectivity paths, then applying targeted fixes without disrupting production networks.
Fortinet NSE5_FSW_AD-7.6 Exam Short Quiz
Attempt this Fortinet NSE5_FSW_AD-7.6 exam quiz to self-assess your preparation for the actual Fortinet NSE 5 - FortiSwitch 7.6 Administrator exam. CertBoosters also provides premium Fortinet NSE5_FSW_AD-7.6 exam questions to pass the Fortinet NSE 5 - FortiSwitch 7.6 Administrator exam in the shortest possible time. Be sure to try our free practice exam software for the Fortinet NSE5_FSW_AD-7.6 exam.
An administrator needs to deploy managed FortiSwitch devices in a remote location where multiple VLANs must be utilized to segment devices. No Layer 3 switch or router is present. The the only WAN connectivity is the router provided by the ISP connected to the public internet.
Which two items will the administrator need to use? (Choose two.)
☐
AA FortiSwitch interface connected to the ISP router configured with fortilink-13-mode enabled.
☐
BFortiSwitch and FortiGate devices configured with VXLAN interfaces.
☐
CFortiSwitch devices configured with NAT disabled.
☐
DFortiSwitch devices that have the required internal hardware for this configuration.
☐
EFortiSwitch and FortiGate devices configured with IPsec interfaces.
FortinetNSE5_FSW_AD-7.6
Q2:
What feature can network administrators use to segment network operations and the administration of managed FortiSwitch devices on FortiGate?
○
AFortiGate multi-tenancy
○
BMulti-chassis link aggregation trunk
○
CFortiGate clustering protocol
○
DFortiLink split interface
FortinetNSE5_FSW_AD-7.6
Q3:
Which statement about the quarantine VLAN on FortiSwitch is true?
○
AQuarantine VLAN has no DHCP server
○
BUsers who fail 802.1X authentication can be placed on the quarantine VLAN.
○
CIt is only used for quarantined devices if global setting is set to quarantine by VLAN.
○
DFortiSwitch can block devices without configuring quarantine VLAN to be part of the allowed VLANs.
FortinetNSE5_FSW_AD-7.6
Q4:
Refer to the exhibits.
An administrator has deployed two FortiSwitch devices, Core-1 and Core-2, as multichassis link aggregation group (MCLAG) peers. These switches are connected to FortiGate for FortiLink and to an access switch (Access-1) using an inter-switch link (ISL). After configuration, the administrator notices that both Core-1 and Core-2 are claiming to be the root bridge in the Multiple Spanning Tree Protocol (MSTP) topology. What explains this behavior? (Choose one answer)
○
AFortiGate participates in MSTP and causes both switches to assume the root bridge role.
○
BThe ISL was not configured correctly, leading to MSTP inconsistency.
○
CBoth switches share the same bridge ID because MCLAG treats them as one logical switch.
○
DMCLAG automatically disables STP on all peer switches.
FortinetNSE5_FSW_AD-7.6
Q5:
Which QoS mechanism maps packets with specific class of service (COS) or Differentiated Services Code Point (DSCP) markings to an egress queue? (Choose one answer)
