Available Number of Questions: Maximum of
70 Questions
Exam Name: Aruba Certified Campus Access Mobility Expert Written Exam
Exam Duration: 120 Minutes
Related Certification(s):
HP Aruba, HP ACX - Campus Access Mobility Certifications
HP HPE7-A07 Exam Topics - You’ll Be Tested in Actual Exam
Expect the exam to judge whether you can think like the person who has to make a campus work on Monday morning, not just recite features. The heaviest lift is deploying campus access across wireless and wired together, because the questions assume you can carry intent from edge ports to SSIDs without getting lost in the handoffs. You will be pushed into advanced WLAN configuration choices where small settings change roaming behavior, airtime use, and client experience, and you need to connect those choices back to the wired underlay that feeds APs and enforces access at the edge. Security shows up as a practical constraint, not a separate chapter, since you are expected to lock down both wired and wireless while still onboarding devices cleanly and managing them at scale. Monitoring and network automation are treated like everyday tools for proving what happened and pushing repeatable changes, and they often set the stage for troubleshooting rather than replacing it. Troubleshooting itself is about method and evidence, including how packets expose where a flow breaks across authentication, policy, VLANs, and RF decisions, plus how device management details can create symptoms that look like RF problems. What trips people up is treating wireless as isolated, because the exam keeps dragging you back to the campus access end to end story, so study by tracing real client journeys and asking what you would check next.
HP HPE7-A07 Exam Short Quiz
Attempt this HP HPE7-A07 exam quiz to self-assess your preparation for the actual HP Aruba Certified Campus Access Mobility Expert Written Exam . CertBoosters also provides premium HP HPE7-A07 exam questions to pass the HP Aruba Certified Campus Access Mobility Expert Written Exam in the shortest possible time. Be sure to try our free practice exam software for the HP HPE7-A07 exam.
1of 0 questions |
HP HPE7-A07 Exam Quiz
✓ 0 answered
🔖 0 bookmarked
HPHPE7-A07
Q1:
What is me recommended configuration to ensure link aggregation is consistent in a campus topology using VSX with two aggregation switches and downlinks to access switches?
○
AUse a custom LACP hash algorithm for improved load Balancing.
○
BKeep the MTU values at the default setting for GRE and VXLAN communications
○
CUse the command 'vsx-sync mclag-interfaces' under the VSX context.
○
DUse the command 'vsx-sync active-gateways' under the VSX context.
HPHPE7-A07
Q2:
Exhibit.
What is me expected behavior for ARP traffic sent from H1?
○
AA2 will drop the ARP traffic.
○
BA2 will send the ARP traffic out of ports 1/1/1-1/1/4.
○
CA2 will flood the ARP traffic out of all interfaces.
○
DA2 will send the ARP traffic out of ports 1/1/1 and 1/1/3.
HPHPE7-A07
Q3:
A customer has interfering devices that are seen over the air. They contact you and ask you to configure RAPIDS to help identify interfering and rogue APs. HPE Aruba Networking Central identifies a rogue AP and displays the connected switch port.
How can HPE Aruba Networking Central identify which switch port the AP is connected to?
○
Adevice profiting on the switch
○
Bfrom the AP MAC address table
○
Cfrom the switch LLDP neighbors table
○
Dfrom the switch MAC address table
HPHPE7-A07
Q4:
A customer's infrastructure is set up to use Doth primary and secondary gateway clusters on the SSID profile What is a valid reason for the AP to failover to the secondary gateway cluster?
○
AThe primary gateway cluster is up. out the AP is unable to reach the primary gateway cluster.
○
BThe secondary gateway cluster is up. hut the AP is unable to reach the secondary gateway cluster
○
CThe secondary gateway cluster is heterogeneous.
○
DThe secondary gateway cluster is homogeneous.
HPHPE7-A07
Q5:
A customer is planning to add loT devices that connect wirelessly to the existing 802.1X SSlD. The customer will use ClearPass to authenticate the IoT devices by MAC address but other devices will still need to authenticate by only 802 1X
Exhibit.
The customer provided the current configuration and reported their non-loT 802. IX devices are no longer able to connect. Which configuration change can be made to fix the issue?
○
AModify opmode wpa3-aes-gcm-256 to opmode wpa2-aes
○
BAdd i2-autn-fairtnrougn to the WLAN configuration
○
CRemove mac-authentication from the WLAN configuration
